Manual Restart Mac

Posted on 11-05-2021 by admin

To use any of these key combinations, press and hold the keys immediately after pressing the power button to turn on your Mac, or immediately after your Mac begins to restart. Keep holding until the described behavior occurs.

Manual Restart Mac Computer

If you need to reboot and you don't feel like shutting down your apps one by one or waiting for Mac OS to walk you through them, press Ctrl+Cmd+Eject to reboot your Mac immediately, with no alerts. However, if you've decided to use a third-party program or used Target Disk mode to erase your Mac, you should follow these additional steps to ensure that your Touch Bar data is also erased. Turn on or restart your MacBook Pro. Hold down Command and R at the same time right after you restart your Mac. Keep holding down the keys until your Mac.

If your Mac is using a firmware password, all of these key combinations are disabled, except as noted below.

Command (⌘)-R: Start up from the built-in macOS Recovery system. Or use Option-Command-R or Shift-Option-Command-R to start up from macOS Recovery over the Internet. macOS Recovery installs different versions of macOS, depending on the key combination you use while starting up. If your Mac is using a firmware password, you're asked to enter the password.

Option (⌥): Start up to Startup Manager, which allows you to choose other startup disks or volumes, if available. If your Mac is using a firmware password, you're asked to enter the password.

Option-Command-P-R:Reset NVRAM or PRAM. If your Mac is using a firmware password, it ignores this key combination or starts up from macOS Recovery.

Shift (⇧): Start up in safe mode.

D: Start up from the built-in Apple Hardware Test or Apple Diagnostics utility, depending on your Mac model. Or use Option-Dto start up from this utility over the Internet.

N: Start up from a NetBoot server, if your Mac supports network startup volumes. To use the default boot image on the server, hold down Option-N instead.